Siemens 6EP1336-2BA10 Power Supply
Siemens Power Supply
Input: 1-phase AC
Supply voltage
● 1 at AC Rated value 120 V
● 2 at AC Rated value 230 V
● Note Automatic range selection
Input voltage
● 1 at AC 85 ... 132 V
● 2 at AC 176 ... 264 V
Wide-range input: No
Overvoltage resistance: 2.3 × Vin rated, 1.3 ms
Mains buffering at Iout rated, min.: 20 ms; at Vin = 120/230 V
Rated line frequency 1: 50 Hz
Rated line frequency 2: 60 Hz
Rated line range: 47 ... 63 Hz
Input current
● at rated input voltage 120 V 7.5 A
● at rated input voltage 230 V 3.5 A
Switch-on current limiting (+25 °C), max.: 11 A
Output: Controlled, isolated DC voltage
Rated voltage Vout DC: 24 V
Total tolerance, static ±: 3 %
Static mains compensation, approx.: 0.5 %
Static load balancing, approx.: 1 %
Residual ripple peak-peak, max.: 150 mV
Spikes peak-peak, max. (bandwidth: 20 MHz): 240 mV
Adjustment range: 24 ... 28 V
Product function Output voltage adjustable: Yes
Output voltage setting: via potentiometer; max. 480 W
Status display: Green LED for 24 V OK
Signaling: Relay contact (NO contact, rating 50 V DC/ 0.3 A) for "24 V OK"
On/off behavior: No overshoot of Vout (soft start)
Startup delay, max.: 1.5 s
Voltage rise, typ.: 50 ms
Voltage increase time of the output voltage maximum: 500 ms
Rated current value Iout rated: 20 A
Current range: 0 ... 20 A
● Note: 24 A up to +45°C; +60 ... +70 °C: Derating 5%/K
Supplied active power typical 480: W
Short-term overload current
● on short-circuiting during the start-up typical: 35 A
● at short-circuit during operation typical: 35 A
Duration of overloading capability for excess current
● on short-circuiting during the start-up 100 ms
● at short-circuit during operation 100 ms
Parallel switching for enhanced performance: Yes
Numbers of parallel switchable units for enhanced performance: 2
Efficiency at Vout rated, Iout rated, approx.: 90 %
Power loss at Vout rated, Iout rated, approx.: 53 W
Dynamic mains compensation (Vin rated ±15 %), max.: 1 %
Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ.: 3 %
Setting time maximum: 10 ms
Connection technology: screw-type terminals
Connections
● Supply input L1, N, PE: 1 screw terminal each for 0.2 ... 4 mm² singlecore/finely stranded
● Output +, -: 2 screw terminals each for 0.2 ... 4 mm²
● Auxiliary 13, 14 (alarm signal): 1 screw terminal each for 0.14 ... 1.5 mm²
Width of the enclosure: 115 mm
Height of the enclosure: 145 mm
Depth of the enclosure: 150 mm
Required spacing
● top 50 mm
● bottom 50 mm
● left 0 mm
● right 0 mm
Weight, approx.: 2.4 kg
Product feature of the enclosure housing for side-byside mounting: Yes
Installation: Snaps onto DIN rail EN 60715 35x7.5/15
Electrical accessories: Buffer module
Mechanical accessories: Device identification label 20 mm × 7 mm, pale turquoise 3RT1900-1SB20 MTBF at 40 °C 1 778 916 h
Other information: Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)