IFM OJ5026 Retro reflective sensor
Retro reflective sensor
Type of light: red light
Housing: rectangular
Application
System: polarization filter
Function principle: Retro-reflective sensor
Electrical data
Operating voltage[V]: 10...30 DC
Current consumption[mA]: < 22
Protection class: III
Reverse polarity protection: yes
Type of light: red light
Wave length[nm]: 660
Outputs
Electrical design: PNP
Output function: light-on/dark-on mode; (programmable)
Max. voltage drop switching output DC[V]: 2.5
Permanent current rating of switching output DC[mA]: 200
Switching frequency DC[Hz]: 2000
Short-circuit protection: yes
Type of short-circuit protection: yes (non-latching)
Overload protection: yes
Monitoring range
Range referred to prismatic reflector[m]: 0...2; (Prismatic reflector Ø 80 E20005)
Range adjustable: yes
Max. light spot diameter[mm]: 64
Light spot dimensions refer to: at maximum range
Polarization filter available: yes
Operating conditions
Ambient temperature[°C]: -25...60
Protection: IP 67
Tests / approvals
EMC: EN 60947-5-2
MTTF[years]: 854
Mechanical data
Weight[g]: 27.3
Housing: rectangular
Dimensions[mm]: 35 x 11 x 24
Material: housing: ABS; fixture: diecast zinc; LED window: SEPS; pushbutton: SEPS
Lens material: glass
Lens alignment: Side sensing
Displays / operating elements
Display: Switching status 1 x LED, yellow Power 1 x LED, green Function 1 x LED, red
Electronic lock: yes
Accessories
Items supplied: screws: 2 x (M3 x 16 mm) Basic clip: 1, E20964 spring washers: 2 Nuts: 2
Remarks: cULus - Class 2 source required
Pack quantity1 pcs.
Connection: Connector: 1 x M8; coding: A